压浆料|保定灌浆料生产厂家

行业新闻

堵漏防水材料(2)

发布日期:2016-06-12 |
分享
加入收藏责任编辑:固维

Caulking Waterproofing Material

一、 Brief Introduction to the Product:
  Caulking waterproofing material is an efficient damp-proof impermeable and caulking material developed after adopting domestic and foreign advanced technology.

二、 Main Features:
   Caulking waterproofing material is classified as rapid solidification type and delayed solidification type. The two type s are all single-component gray powder.

1 、 It could be constructed in water environment with simple tools, easy to use . The effects of water-ward side and back-water side are the same. The coating is thin with good quality.
2 、 It's nontoxic and smell-less, and shall not pollute the environment.
3 、 It could combine the basic body to an integer. It is resistant to aging, cracking and water.
4 、 It has high impermeability and adhesion. Water will be sealed up immediately after caulking.

三、 Application scope:
   It's applicable for waterproofing and repairing of varied buildings of brick or concrete structure, specially for damp resistance, seepage resistance and caulking for varied underground building, channel, reservoir, bathroom, etc.

四、 Principal specifications:(in compliance with standard JC900-2002):

五、 Construction points:
Requirements of the basic surface:

1 、 The basic surface shall be flat, solid, clean and fully wet to saturated, but without accumulated water.
2 、 Ingredients : Delayed solidification type: Powder : Water=1:0.35~0.4(by weight).
  To be stirred to putty.
  Rapid solidification type : powder : water=1:0.3~0.35(by weight).
  To be stirred to putty.
3 、 Coating : Generally the coating will be 2~3 layers and the material quantity of every layer shall be about 1kg /m 2 .
4 、 Caulking : Mix the tempojel to agglomerate. Hammer it to solid state by wooden stick as soon as possible after the agglomerate emits heat and becomes a little harder, and spread the coating outside for twice with the producte.
5 、 Wet curing shall be implemented after the coating has been hardened. The duration of wet curing will be generally 2 to 3 days.

官方微博
分享:
微信
微信二维码
友情链接: 灌浆料  
河北固维新材料有限公司 京ICP备12010796号 ©2014- 联系电话:15803128757

产品展示

服务与配件

活动站

产品在线订购

返回

回到顶部